The simple way to produce a mirror finish on Brass, Copper, Aluminium and other soft metals in 2 easy steps.
Kit includes:
1 x Hard buff 10 fold 100mm dia,
1 x Soft buff 10 fold 100mm dia.
1 x Brown polishing bar
1 x Blue polishing bar
1 x Straight shank arbor

The simple way to produce a mirror finish on Stainless Steel, Iron and other Hard Metals in 3 easy stages.
1 x Sisal buff 2 section 100mm dia.
1 x Hard buff 10 fold 100mm dia,
1 x Soft buff 10 fold 100mm dia.
1 x Grey polishing bar
1 x Pink polishing bar
1 x Blue polishing bar
1 x Straight shank arbor

The simple way to produce a mirror finish on Wood in 3 easy stages.
1 x Aluminium Oxide buff 4 section 100mm dia.
1 x Hard buff 10 fold 100mm dia,
1 x Soft buff 10 fold 100mm dia.
1 x Buff polishing bar
1 x Straight shank arbor

The simple way to produce a mirror finish on Plastic, Fibreglass and Bakelite in 2 easy stages.
1 x Hard buff 10 fold 100mm dia,
1 x Soft buff 10 fold 100mm dia.
1 x Brown polishing bar
1 x Buff polishing bar
1 x Straight shank arbor

The simple way to produce a mirror finish on Chrome, EPNS, & Plated Metal in 2 easy stages.
1 x Hard buff 10 fold 100mm dia,
1 x Soft buff 10 fold 100mm dia.
1 x White polishing bar
1 x Straight shank arbor

For preparatory work to smooth out the surface prior to buffing.
Use on Brass, Copper, Aluminium (non-ferrous metals), Fibreglass, Plastics and Bakelite.
Use with hard buffs (loose or stitched).
Pack contains 2 bars 100 x 27 x 15mm

For rough first stage work tosmooth out scratches and blemishes
Use on Stainless Steel, Steel, Iron and other hard metals (ferrous metals).
Use with sisal and other stitched buffs
Pack contains 2 bars 100 x 27 x 15mm

For intermediate stage to smooth out surfaces for buffing.
Use on Stainless Steel, Steel, Iron and other hard metals (ferrous metals).
Use with hard buffs (loose or stitched).
Pack contains 2 bars 100 x 27 x 15mm

For intetermediate buffing work and high polish final stages.
Use on Glass, Bakelite ans Wood
Use with hard buffs (loose or sticthed) and soft loosefold buffs
Pack contains 2 bars 100 x 27 x 15mm

For final high glossing/polishing stage.
Use on Stainless Steel, Steel, Iron and other hard metals (ferrous metals).
Use with soft loosefold buffs
Pack contains 2 bars 100 x 27 x 15mm

For very high glossing/polishing
Use on Precious metals, Gold, Silver. Also, Brass, Copper and Glass.
Use with soft loosefold buffs
Pack contains 2 bars 100 x 27 x 15mm

For preparatory work to smooth out surfaces for buffing and high polish final stage polishing.
Use on Chrome, Plated metals and EPNS (Electro Plated Nickel Silver)
For use with hard buss (loose or stictched) and soft loosefold buffs.
Pack contains 2 bars 100 x 27 x 15mm

For use with grey or brown polishing compounds for preparatory work.
Metal centre with 10mm hole for use on straight shank arbors (see PC1401 below)

For use with pink, white, blue, buff and maroon (rouge) polishing compounds for secondary and final polishing (glossing) procedures.
Metal centre with 10mm hole for use on straight shank arbors (see PC1401 below)

For use with grey polishing compound for preparatory work.
Metal centre with 10mm hole for use on straight shank arbors (see PC1401 below)

For use without polishing compounds for preparatory or 'denibbing' stage to smooth out blemishes (wood or metal).
Can also be used for applying a satin finish to metals
Metal centre with 10mm hole for use on straight shank arbors (see PC1401 below)

Straight shank arbor to hold metal centre buffs in drill chuck. Shank size 5.9mm - Overall length 60mm.

A range of 5 Kits that contain the right combination of polishing buffs, compounds and arbor for various applications. All the buffs in this range are the traditional drilled leather centre type which should be attached to a tapered spindle. Depending on the spindle used, these can be mounted onto polisher/grinder machines flexible drive shafts or directly into power drill chucks.
Choose from the list below:

PC2001 - For Non Ferrous (soft) Metals e.g. Brass, Copper, Aluminium
PC2002 - For Ferrous (hard) Metals e.g. Steel, Stainless Steel, Iron
PC2003 - For Wood (hard or soft)
PC2004 - For Plastic, Fibreglass & Bakelite
PC2005 - For Chrome, Plated Metals & EPNS

Used exclusively for pre-polishing (cutting) steel, iron, stainless or other materials.
Drilled leather centre for use with tapered spindle.
Available in three different sizes. Select from the drop down menu the size of Sisal mop you require.

Made from high grade quality calico, closely stitched to add rigidity and firmness. These mops are designed for pre-polishing (cutting) non-ferrous materials such as brass, or copper.
Drilled leather centre for use with tapered spindle.
Avaiable in a variety of sizes. Select from the drop down list the type of stitched mop you require.

Similar properties to the 'B' buffs above, but a finer weave.
Avaiable in a variety of sizes.
Drilled leather centre for use with tapered spindle.
Select from the drop down list the type of stitched mop you require.

Medium weave finishing mops for ferrous materials such as steel, iron, stainless or other hard materials.
Drilled leather centre for use with tapered spindle.
Select from the drop down list the size of buff you require.

Made from fine weave 'G' quality calico for non ferrous materials such as brass, copper and precious metals. Also suitable for use on plastic and veneers.
Drilled leather centre for use with tapered spindle.
Select from the drop down menu the size you require.

For use without polishing compounds for preparatory or 'denibbing' stage to smooth out blemishes (wood or metal).
Can also be used for applying a satin finish to metals.
Drilled leather centre for use with tapered spindle.

Choice of 2 types: 1.5" (38mm) x 0.5" (12.5mm) either Hard or Soft.
Suitble for mounting on tapered spindle PC1034. Ideal for use with flexible drive shafts or directly from an electric drill.

Tapered Spindle to hold all leather centre buffs in a chuck. Overall length 77.5mm. Shank diameter 5.9mm.

Plain bores fitted with a grub screw to secure fixing. choice of 2 bore diameters with either left or right hand helix.